Filters for swamp coolers are not considered original equipment, but you can add them during or after installation. The pads of swamp coolers can function as a filter, but you should do so if you prefer to use the filters. Air and water can be filtered with swamp cooler filters.
These filters can keep your cooler from rusting or molding by filtering the air. You should use a cooler filter when hard water is in your cooler reservoir to prevent rust or dirt from accumulating.
Swamp Cooler Filter:
Adding a swamp cooler filter to your cooler will ensure that the air is clean and filter the water in the reservoir, preventing the cooler from rusting and becoming dirty over time. If your cooler is pulling air with poor quality or any odor in the air, you should utilize the air filter.
If your cooler is not working correctly and there is a smell in the air, you should drain all the water out of it or add a few drops of winger in the water.
The swamp cooler is based on the simple principle of pulling air from outside. If it is dusty out, then it will pull dusty air into your cooler. In this case, the swamp cooler filter will help you in getting pure air.
Swamp Cooler Water Filter:
The pads of the swamp coolers act as filters, which filter the air and water inside the cooler. You should use your swamp cooler filter if hard water or dirt is interfering with your cooler’s efficiency. In addition, if your cooler is blowing dust or smoke into the cool air that comes out of it, you need to use filters.
When the cooler reservoir is full of mud or hard water, drain all the water and then replace the water filter in the cooler’s reservoir. It will protect your cooler from dirt, mud, or corrosion.
How Swamp Cooler Filter Work:
The swamp cooler takes the hot air from the outside, cools it, and blows it into the room. If there is dust or smoke in the outside environment, your cooler will blow dusty or smoky air.
Filters can filter dusty and smoky environments in the cooler, which will blow clean air into the room. During the filtering process, dust will be absorbed and cleansed. Although the pads of swamp coolers can function as the filter in swamp coolers, and they can purify the air and water, you can use the swamp cooler filter for the best results.
[rank_math_rich_snippet id=”s-4ecf6860-d30d-4952-9f54-a242f9f1ddd6″]
Swamp Cooler Vent Filter:
If you are using a window swamp cooler, you install it through the vent, but if there is any gap between the vent and the cooler, dust, smoke, and hot air can enter the room.
The best option for covering the vent is to use a vent filter. Vent filters protect your room from dust and smoke.
Does A Swamp Cooler Filter Out Smoke
We have already discussed that swamp coolers use air from the outside, after which the air is cooled and blown into your room. When there is smoke in the outside area, then your cooler will also blow smoky air.
In this situation, the swamp cooler filter can also filter dust and smoke, so you get pure cooled air.
Swamp Cooler Waterline Filter:
You can use a filter between the water line if you are concerned about mud or hard water. The filter will remove all dust particles from the waterline, and the pure water will prevent the cooler from rusting or breaking.
Cleaning Swamp Cooler Filter:
Whenever the filter of your swamp cooler appears to be mildewed or contaminated, you can wash it with some soapy water and vinegar. You can use a soft brush and then filter them with water and rinse them well. After that, let them dry.
Hard Water Filter For Swamp Cooler:
While you are filling the water into the reservoir of your swamp cooler, you can install the hard water filter in between the waterline. This will purify the hard water and make the cooler efficiency better.
How To Clean Your Swamp Cooler pads and filters:
- Shut down the power and turn off the water.
- Remove back panel and fiber pads.
- Drain the water from the drain plug.
- Scrub the swamp cooler inside and out.
- Scrub the reservoir and rinse after soaking in white vinegar for an hour.
- Pattern the new fiber padding after the old ones.
Conclusion:
Swamp cooler pads can also work as the water and air filter, but if there is dust in the air or smoke, you use the air filter in your swamp cooler. And if there is hard water or dirt particles in the water, you can use the water filter in your swamp cooler. So it is up to the conditions; if necessary, you can use the filter in your swamp cooler.