Pads are used in swamp coolers for cooling the air inside the cooler so that warm outside air can be taken in and cooled. Through the motor, this cool air is blown outside. Aspen pads and master cool pads are good choices for any type of swamp cooler.
Aspen Swamp Cooler Pads:
The pads of an aspen cooler give you the most significant capacity of any standard cooler. There are two swamp cooler pads available in the market. They are 1 inch and 2 inches. As the thickness of pads increases, the cooler’s performance also increases because they absorb more water if the pad is thick. If pads have more water in them, the cooling of the cooler will be increased.
There are two raw materials, aspen fiber and woven, used to make aspen pads. Any natural material has the incredible ability to hold the water inside; that’s why fiber is used in making the cooler pads. The fibers can hold water, and this is what will improve the performance of pads.
If the pad’s quality is better, the cooler’s performance will be better, so when you buy any cooler, you must consider the performance of the pads. If the quality of pads is not good in the cooler, there will be just hot air blown by the cooler.
So what’s The Catch?
There are few downsides of pads as well. If the quality of the swamp cooler pad is not good, they can deteriorate, and if their fiber falls in the water, this can also damage the water cooler and the fan.
If the fiber in the pads is damaged, this will badly affect the cooler’s performance. The primary purpose of pads is to retain the water in them, but when the pads cannot hold the water in them, the cooler will not work correctly.
To gain maximum cooling, the pads should remain wet with water. Another important factor is to maintain or replace the pads every year. This will maximize the performance of the cooler and maintain the quality of the swamp cooler.
What’s The Alternative?
There are few other pads available in the market; you can buy them, but unfortunately, their cooling capacity and performance may not be so good.
[rank_math_rich_snippet id=”s-bd038854-f2ad-4373-977f-072243e6be06″]
Blue Synthetic Cooler Pads:
These types of pads are also made of synthetic material, and their colour is spongy blue. Their quality is rather good as compared to the aspen pads. They are made of natural and good fiber; that’s why their chance of deterioration is minimal.
There are also few drawbacks of blue synthetic pads; they can not be aboard the water like the aspen pads. These pads are made of natural fiber, and the fiber cannot absorb and retain the moisture inside; that’s why their cooling is not so good compared to the aspen pads.
These pads also absorb hard water and minerals, which may reduce the flow of water in the outer walls. If the flow of water is not good in the cooler, the cooler’s efficiency will not be good.
Mastercool Swamp Cooler Pads:
For the Aerocool and Mastercool cooler, the honeycomb shaper pads are the best pads for cooling and working processes. These pads have the incredible ability to absorb the maximum water in them, and that’s why these pads are better compared to the other pads.
There are two different sizes of Mastercool pads on the market, 8 and 12 inches. As the pad is thick, it absorbs more water, and if it absorbs more water, its performance and cooling will increase.
One important point to note is that you should clean or replace the pads every year. If the water quality is good and soft, the pad’s life will be extended, and soft water also improves the quality and cooling of swamp coolers.
You can read a detailed article on Master cool swamp cooler here.
Breezair Swamp Cooler Pads:
These types of coolers are considered the best swamp coolers, and the cooling of such coolers is impressive. In Breezair swamp coolers,there is no need to replace them every year.
Water absorption is excellent on these types of pads, so the performance will also be good. Typically It is recommended to replace them every three to five years. Breezair cooler pads do not absorb hard water and minerals; that’s why water flow is good in such types of pads.
In terms of swamp cooler pads, follow the instructions given below:
- It would be best if you kept a few things in mind when buying pads for your swamp cooler. Pads should possess a few characteristics.
- Pads for swamp coolers should be capable of absorbing maximum water.
- Swamp cooler pads should not absorb minerals and hard water.
- The flow of water will be good in the pads of the swamp cooler.
- Pads for swamp cooler should not deteriorate.
- The air quality should be maintained by swamp cooler pads.
- There will be no chance of deterioration of the pads since they are made with natural and pure materials.
Where To Buy Swamp Cooler Pads:
Swamp cooler pads are available at any home improvement store. Swamp cooler start-up and maintenance are part of the process in most cases if you hire a professional.
Swamp Cooler Pads Optimization:
- Keep the unit neat and clean
- Use the pure and soft water in the cooler
- Maintain the level of water in your cooler
- Run the cooler in a smart mode, not on full or hard mode
- Swamp cooler pads need to be cleaned regularly
- The cooler should be used where there is a good air crossing